CSS Exam Info
Home » CSCS Mock Test » Specialists Test » Supervisory » CSCS Supervisor Practice Test 2
HS&E TEST
CSCS Supervisor Practice Test 2
1 / 50
Under the Construction (Design and Management) Regulations 2015, which of the following must be in place before demolition work can start?
2 / 50
What is the main risk to this worker, wearing only these items of personal protective equipment (PPE)?
3 / 50
Why should you not walk behind a lorry when it is reversing?
4 / 50
Who is responsible for managing health and safety on site?
5 / 50
Hydrogen Sulphide is a gas given off by rotting organic substances. Which two statements are true about Hydrogen Sulphide?
6 / 50
The ground has become muddy on site. What could be done to prevent the ground becoming slippery?
7 / 50
Which piece of equipment is used with a cable avoidance tool (CAT) to detect cables?
8 / 50
When is the risk of an accident occurring at work most likely to be increased?
9 / 50
What does it mean if there is frost around the valve on a liquefied petroleum gas (LPG) cylinder?
10 / 50
Which of the following is the safest method of accessing a mobile access tower?
11 / 50
A design feature of some airbags used for fall arrest is a controlled leak rate. If you are using these, what must you ensure about the inflation pump?
12 / 50
Where should an emergency escape route take you to?
13 / 50
A mobile access tower must not be used on what surface?
14 / 50
When are personal fall-arrest systems to be used?
15 / 50
Which two of the following factors must be considered when providing first-aid facilities on site?
16 / 50
Someone working in a deep inspection chamber has collapsed. What should you do first?
17 / 50
If you need to wear a full body harness and you have not used one before, what should you do?
18 / 50
You need to use an air-powered tool. What three hazards are likely to affect you?
19 / 50
Who should check a ladder before it is used?
20 / 50
What are two common fire risks on construction sites?
21 / 50
From a safety point of view, which of the following should be considered first when deciding on the number and location of access and egress points on a site?
22 / 50
Where should liquefied petroleum gas (LPG) cylinders supplying an appliance in a site cabin be positioned?
23 / 50
What type of work is most likely to result in fatigue?
24 / 50
What is the advantage of using safety nets rather than a harness and fall-arrest lanyard?
25 / 50
What illness are you most likely to develop, if you breathe in dust and fumes over long periods of time?
26 / 50
Why is it important that hazards are identified?
27 / 50
Under the Construction (Design and Management) Regulations 2015, what must be provided before construction work starts, and then maintained until the end of the project?
28 / 50
Which of the following is the correct order of signs with their categories?
29 / 50
Under the Construction (Design and Management) Regulations 2015, where would you find the arrangements for managing health and safety for the project you are working on?
30 / 50
To reduce the risk of overturning and accidents when not in use, how should earth moving vehicles be parked?
31 / 50
What is the correct way to climb a ladder?
32 / 50
Which of the following should be the first consideration if you need to use a hazardous substance?
33 / 50
Cream band fire extinguishers have which of the following content?
34 / 50
While working on site you cut one of your fingers. What should you do?
35 / 50
If there is a fatal accident or a reportable dangerous occurrence on site, when must the Health and Safety Executive (HSE) be informed?
36 / 50
Who should you inform if someone tells you that they have work-related hand-arm vibration syndrome (HAVS)?
37 / 50
What should be the capacity of a spillage bund around a fuel storage tank, in addition to the volume of the tank?
38 / 50
Which of the following precautions should be taken to prevent a dumper that is tipping material into an excavation from falling into it?
39 / 50
Which two of the following should be provided when working on a fragile roof?
40 / 50
How should cylinders containing liquefied petroleum gas (LPG) be stored on site?
41 / 50
When do the Work at Height Regulations require a working platform to be inspected by a competent person?
42 / 50
Under what circumstance is a worker allowed to operate a plant vehicle?
43 / 50
Following a scaffold inspection under the Work at Height Regulations, how soon must a report be given to the person on whose behalf the inspection was made?
44 / 50
Under the Construction (Design and Management) Regulations 2015, which two of the following must you ensure workers have received before they start working on site?
45 / 50
When working in a confined space, what is it a sign of if there is a smell of rotten eggs?
46 / 50
When planning possible work in a confined space, what should be the first consideration?
47 / 50
Ideally, where should a safety net be rigged?
48 / 50
What action should shift workers take at work if they are taking time-dependent medication, such as insulin?
49 / 50
What should you do if you need to carry a load down a steep slope?
50 / 50
What should be used to protect passers-by from getting arc eye when electric welding is about to start on your site?
Your score is
The average score is 92%
Restart quiz Exit
How was the test? Please submit your Rating and give feedback!
Your email address will not be published. Required fields are marked *
Δ
