CSCS Highway Works Mock Test

0 votes, 0 avg

Specialists Test

Highway Works

1 / 52

What is the purpose of an on-site risk assessment?

To ensure that the work can be carried out in reasonable safety

To protect the employer from prosecution

To identify hazards and risks specific to the site in order to ensure a safe system of work

To ensure there is no risk of traffic build-up due to the works in progress

2 / 52

If you are driving any plant that may overturn, when must a seat belt be worn?

When the vehicle is loaded

When you are carrying passengers

When travelling over rough ground

At all times

3 / 52

What is not usually something to consider while undertaking a site-specific risk assessment before starting highway works?

The cost of the sub-contractor who will be carrying out the work

The type and size of the road

The effect of different weather conditions

The amount and type of traffic

4 / 52

How should you protect a portable traffic-light cable that crosses a road?

It can be unprotected if it is less than 10 mm in diameter

It should be secured firmly to the road surface

A cable crossing protector must be used with ramp warning signs

It should be placed in a slot cut into the road surface

5 / 52

When can you carry authorised passengers in vehicles?

Only if a suitable secure seat is provided for each of them

Only when off the public highway

Only if your supervisor gives you permission

Only if you have a full driving licence

6 / 52

What must you have before towing a compressor on the highway? Give two answers.

Permission from the police

Permission from the compressor hire company

Permission from your supervisor

Working lights, and a number plate on the compressor that matches that of the towing vehicle

The correct class of driving licence

7 / 52

When working after dark, is mobile plant exempt from the requirement to show lights?

Yes, always

Only if they are not fitted to the machine as standard

Not in any circumstances

Yes, if authorised by the supervisor

8 / 52

Why is it not safe to use diesel to prevent asphalt sticking to the bed of lorries?

It will corrode the bed of the lorry

It will react with the asphalt, creating explosive fumes

It will create an environmental hazard

It will create a slipping hazard

9 / 52

What should be used to protect the public from a shallow excavation in a public footway?

Barriers with tapping rails

Cones

Nothing

Pins and bunting

10 / 52

What action is required when a highways vehicle fitted with a direction arrow is travelling from site to site?

Point the direction arrow down

Point the direction arrow up

Travel slowly from site to site

Cover or remove the direction arrow

11 / 52

In which of the following circumstances can someone enter the safety zone?

To store unused plant

To maintain cones and signs

To store materials

To park site vehicles

12 / 52

If a safety cut-out on a machine does not operate, what should you do?

Try and fix it or repair it yourself

Report it at the end of the shift

Keep quiet in case you get the blame

Stop and report it immediately to your supervisor

13 / 52

What is the purpose of the safety zone?

To give a safe route around the working area

To allow extra working space in an emergency

To protect you from the traffic and the traffic from you

To indicate the works area

14 / 52

How should portable traffic signals be assembled and placed?

In an organised manner, to a specified sequence

As work starts each morning

As speedily as possible

During the night

15 / 52

In which two places would you find information about the distances for setting out highways signs in advance of the works under different road conditions?

In the Traffic Signs Manual (Chapter 8)

On the back of the sign

In the Works Order

In the Pink Book

In the new Code of Practice (Red Book)

16 / 52

When using lifting equipment, such as a cherry picker, lorry loader or excavator, how should you follow the indicated safe working load?

It is a guide figure that may be exceeded slightly

It may be exceeded by 10% only

It gives half the maximum weight to be lifted

It must never be exceeded

17 / 52

What must you do before towing a trailer fitted with independent brakes?

Fit a cable that applies the trailer's brakes if the tow hitch fails

Fit a safety chain

Make sure it is possible to drive at a maximum speed of 25 mph along the route you have chosen

Use a rope to secure the trailer to the tow hitch

18 / 52

When should installed highways signs and guarding equipment be inspected?

Regularly, and at least once every day, including when the site is unattended

Immediately after it has been used

No more frequently than once a week

Every hour, except when the site is unattended

19 / 52

In which of the following circumstances would it not be safe to use a cherry picker for working at height?

When the ground is uneven and sloping

When weather protection is not fitted

When the operator is clipped to an anchorage point in the basket

When a roll-over cage is not fitted

20 / 52

What action is required where passing traffic may block the view of highways signs?

Signs must be duplicated on both sides of the road

Signs must be placed higher

Signs must be larger

Additional signs must be placed in advance of the works

21 / 52

What traffic management is required when carrying out a maintenance job on a motorway?

Ten 1 m high cones and a 1 m high 'men working' sign

A scheme installed by a registered traffic management contractor

The same as would be required on a single carriageway

A flashing beacon and a keep left or right sign

22 / 52

What should you do if drivers approaching highway works cannot see the advance signs clearly because of poor visibility or obstructions caused by road features?

Place additional signs in advance of the works

Extend the sideways clearance

Extend the safety zones

Lengthen the lead-in taper

23 / 52

You are moving or laying slabs, paving blocks or Kerbs on site. Which two of the following methods would be classed as manual handling?

Using a scissor lifter attachment on an excavator

Using a trolley or sack barrow

Using a two-man scissor lifter

Using a crane with fork attachment

Using a suction lifter attached to an excavator

24 / 52

What is the minimum traffic management required when carrying out a short-term minor maintenance job in a quiet, low-speed side road?

The same as required for a road excavation

A flashing amber beacon and a keep left or right arrow

Temporary traffic lights

Five cones and a blue arrow

25 / 52

When kerbing works are being carried out, how should kerbs be taken off the vehicle?

By pushing them off the back

By lifting them off manually using the correct technique

By asking your workmate to give you a hand

By using mechanical means, such as a machine fitted with a grab

26 / 52

Which checks should the operator of a mobile elevating work platform (MEWP) (for example, a cherry picker) carry out before using it?

That emergency systems operate correctly

That a seat belt is provided for the operator

That a roll-over cage is fitted

That the hydraulic system is drained

27 / 52

What action should you take if a vehicle, driven by a member of the public, enters the coned off area on a dual carriageway?

Shout and wave them off site

Ignore them

Help them to leave the site safely using the nearest designated exit

Remove a cone and direct the driver back on to the live carriageway

28 / 52

Why is it necessary to wear hi-vis clothing when working on roads?

To protect clothes worn underneath from damage

So your supervisor can see you

So road users and plant operators can see you

Because it will keep you warm

29 / 52

What is the main reason why temporary highways signing needs to be removed when works are completed?

To allow the road to be opened fully

To reuse signs on new jobs

It gets traffic flowing

It is a legal requirement

30 / 52

What should you do when leaving plant unattended?

Park with blocks under the front wheels

Leave the amber flashing beacon on

Leave it in a safe place with the engine ticking over

Apply the brake, switch off the engine and remove the key

31 / 52

When providing portable traffic signals on roads used by cyclists, what action should you take?

Operate the signals manually

Allow more time for slow-moving traffic by increasing the all-red phase of the signals

Use stop-and-go boards only

Locate the signals at bends in the road

32 / 52

What should you do with materials that have to be kept on site overnight?

Put pins and bunting around them

Only stack them on the grass verge

Don't stack them above 2 m high

Stack them safely and in a secure area

33 / 52

Who is responsible for the security of the load on a vehicle?

The police

The driver

The driver's supervisor

The driver's company

34 / 52

What is the maximum distance between the 'roadworks ahead' signs for work activities that move along the carriageway, such as sweeping, verge mowing and road lining?

Quarter of a mile

Half a mile

One mile

Two miles

35 / 52

How often must a competent person thoroughly examine lifting equipment for lifting persons (for example, a cherry picker)?

Every 18 months

Every 24 months

Every 12 months

Every 6 months

36 / 52

A single vehicle is being used to carry out mobile highway works during the day. What sign or symbol must be clearly displayed on or at the rear of the vehicle?

A specific task warning sign (for example, gully cleaning)

A road narrows sign (left or right)

A roadworks ahead sign

A keep left or right arrow

37 / 52

How must signs on footways be located?

So that they can be read by site personnel

So that they do not create a hazard for pedestrians

So that they block the footway

So that they can be easily removed

38 / 52

Which is not an approved means of controlling traffic at roadworks?

Priority signs

Police supervision

Hand signals by operatives

A give-and-take system

39 / 52

What must you do when getting off plant and vehicles?

Use a pair of steps which allow you to climb out of the vehicle

Use the designated access and egress point whilst maintaining three points of contact with the vehicle

Look before you jump, then jump down facing the vehicle

Use the wheels and tyres for access

40 / 52

What are two effects of underinflated tyres on the operation of a machine?

It increases the operating speed of the engine

It causes increased tyre wear

It can make the machine unstable

It decreases the operating speed of the engine

It causes decreased tyre wear

41 / 52

What action is required if a vehicle detector on temporary traffic lights becomes defective?

Operate on all-red and call the service engineer

Operate on fixed time or manual and call the service engineer

Control traffic at the defective end using hand signals

Switch the lights off until the supervisor arrives on site

42 / 52

When it is necessary to tip into an excavation, what is the preferred method of preventing the vehicle getting too close to the edge?

Signaller

Driver's experience

Stop blocks

Signage

43 / 52

What should you do if you are the driver of a vehicle and lose sight of the vehicle marshaller while reversing your vehicle?

Stop and locate the vehicle marshaller

Continue reversing, as long as your vehicle is equipped with a klaxon and flashing lights

Find someone else to watch you reverse safely

Continue reversing slowly

44 / 52

What must you do approximately 200 m before a site works access on a motorway?

Switch on the flashing amber beacon

Switch on the headlights

Switch on the flashing amber beacon and the appropriate indicator

Switch on the vehicle hazard lights

45 / 52

What is the correct way to dismount from the cab or driving seat of plant and vehicles?

Jump down facing forwards (away from the vehicle)

Jump down well clear of the vehicle

Use three points of contact facing forwards (away from the vehicle)

Use three points of contact facing backwards (towards the vehicle)

46 / 52

Where would you find information about working on a dual carriageway with a speed limit above 40 mph?

In the Traffic Signs Manual (Chapter 8)

In the welfare cabin

In the Blue Book

In the Pink Book

47 / 52

You are working on a dual carriageway with a 60-mph speed limit although you are not in the working space. What is the minimum standard of hi-vis clothing that you must wear?

Reflective hard hat

Reflective long-sleeved jacket

Reflective waistcoat

Reflective sash

48 / 52

How must highway signs, lights and guarding equipment be properly secured?

By built-in weights where possible

By pushing them securely into the soft verge

By iron weights suspended from the frame by chains or other strong material

By roping them to concrete blocks or kerb stones

49 / 52

Which of these is the safest method of operating a machine under electrical power lines when it has an extending jib or boom?

Let down the tyres on the machine to increase the clearance

Adapt the machine to limit the extension of the jib or boom

Place a warning notice on the machine

Erect signs to warn drivers while they are operating the machines

50 / 52

What action is required where it is not possible to maintain the correct safety zone?

Stop work and consult your supervisor

Barrier off the working space

Use extra cones on the lead-in taper

Place additional advance signing

51 / 52

When should you switch on the amber flashing beacon fitted to your highways vehicle?

Only in poor visibility

When travelling to and from the depot

When it is being used as a works vehicle

At all times

52 / 52

Which two site conditions must be met before traffic management can be reduced to the minimum requirements?

There is a footpath

It is a period of low risk

There are double yellow lines

Visibility is good

Traffic is heavy

Your score is

The average score is 0%

Exit

How was the test? Please Submit your Rating and give us a feedback!

Thank you for taking the time to complete a mock test on our website. We appreciate your effort and dedication.

We wish you the best of luck in your preparation and future exams. If you have any feedback or suggestions, please let us know.

Leave a Reply Cancel reply